ANALYSIS OF THE TECHNOLOGICAL PROCESS OF INSTALLATION OF ELEVATOR SHAFTS ON THE EXAMPLE OF MONOLITHIC MULTI-STOREY BUILDINGS UNDER CONSTRUCTION IN OSH
Abstract
During the construction of multi-storey buildings, elevators are one of the main elements of a house under
construction. The peculiarity of the elevator in a multi-storey building is that the opening of the elevator shaft on
each floor should have the same position in the plan, i.e. the elevator shaft should run strictly along a vertical line.
To control this condition, there are basically two special geodetic methods: the method of a light device and a
thread plumb line. The main purpose of this work is to identify a method that satisfies the required accuracy of the
installation of elevator shafts. To investigate this problem, measurements were carried out in two multi-storey
buildings, conventionally designated as A and B.
References
2. SNiP 3.0 3.0 1 -8 7. Nesushhie i ograzhdajushhie konstrukcii / Gosstroj Rossii — M. Gosstroj SSSR, 1989 — 124 s.
3. GOST 5446 – 2015. Lifty passazhirskie. Osnovnye parametry i razmery. – M.: Standartinform, 206.16 – 20 s.
4. V.Ja.Joffe. Vysokoskorostnye lifty. – M.: Strojizdat, 1988 – 92 s.
5. Ju.K.Neumyvakin, A.S.Smirnov. Praktikum po geodezii. M.: Nedra, 1985 – 482 s.
6. Je.A.Teshaev, M.M. Zhalaldinov. Analiz stroitel'nyh dopuskov i tochnosti geodezicheskih razbivochnyh rabot v stroitel'stve mnogojetazhnyh monolitnyh domov. //Materialy mezhdunarodnoj nauchno – prakticheskoj konfepencii. Samarkand, 21 – maj 2021.
7. Je.A.Teshaev. Obespechenie geodezicheskogo kontrolja pri montazhe liftovyh shaht 12 – jetazhnogo doma, strojashhegosja v g.Osh.
CC BY-ND
A work licensed in this way allows the following:
1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.
2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."
2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.
