INCREASED FLEXIBILITY IN THE TECHNOLOGICAL SYSTEM: CONTINUOUS CASTING MACHINE (CCM) – HOT STRIP MILL (HSM)

  • M. Shitov JSC «MAGNITOGORSK GIPROMEZ»
DOI: https://doi.org/10.31618/ESU.2413-9335.2021.1.93.1548
Keywords: continuous casting machine (CCM), hot strip mill (HSM), slabs reduction, efficiency, rolling schedule.

Abstract

Possible ways of increasing the flexibility of the "casting - rolling mill" system are considered taking into account the limitations of three tasks: a change in the width of the slab, maintaining its temperature and the formation of the assembly batch.

References

1. Konovalov Ju.V. Spravochnik prokatchika. Spravochnoe izdanie v 2-h knigah. Kniga 1. Proizvodstvo gorjachekatanyh listov i polos. M.: «Teplotehnik», 2008. 640 s.
2. Promyshlennoe oprobovanie jenergosberagajushhej tehnologii na stanah 2000 NLMK i CherMK A.L. Ostapenko, Ju.V. Konovalov, R.O. Perel'man i dr. // Stal'. 1989. № 3. S. 49-54.
3. Solov'ev A.G., Shitov M.V. Razrabotka jeffektivnyh rezhimov gorjachej prokatki // Nauchnaja diskussija: voprosy tehnicheskih nauk: sb. st. po materialam XLVII Mezhdunarodnoj nauchnoprakticheskoj konferencii «Nauchnaja diskussija: voprosy tehnicheskih nauk». M., Izd. «Internauka», 2016. № 6(36). S. 57-63.
4. Besprogrammnaja prokatka kak jelement tehnologii sovmeshhenija nepreryvnoj razlivki i prokatki V.P. Nastich, Z.P. Karetnyj, S. L. Kocar' i dr. // Proizvodstvo prokata. 1999. № 10. S. 25-30.
5. Solov'jov A.G., Shitov M.V. Kompleksnaja ocenka reducirujushhego oborudovanija v tehnologicheskoj sisteme MNLZ-ShSGP // Aktual'nye problemy sovremennoj nauki, tehniki i obrazovanija: materialy 73-j mezhregional'noj nauchno-tehnicheskoj konferencii / pod red. V.M. Kolokol'ceva. Magnitogorsk: FGBOU VPO «MGTU», 2015. T. 1. S. 151-154.
6. Salganik V.M., Senichev G.S., Tverskoj Ju.A. Problemy formirovanija shiriny polos i resursosberezhenie pri gorjachej listovoj prokatke// Progressivnye tehnologicheskie processy v obrabotki metallov davleniem: Sb. nauch. tr./ Pod red. akad. B.A. Nikiforova. Magnitogorsk: MGMA. 1997. S. 169-173
7. Konovalov Ju.V. MNLZ kak mnogofunkcional'nyj agregat dlja razlivki, modificirovanija i deformirovanija metalla (Chast' II) // Chjornaja metallurgija: Bjul. In-ta «Chermetinformacija». 2010. № 6. S. 41-52.
8. Solov'jov A.G., Shitov M.V. Vlijanie besprogrammnoj prokatki na jenergojeffektivnost' kompleksa UNRS-ShSGP // Modelirovanie i razvitie processov obrabotki metallov davleniem: mezhd. Sb. nauch. tr. pod red. V.M. Salganika. Magnitogorsk: izd. MGTU im. G.I. Nosova. 2014. Vyp. 20. S. 223-231.
9. Osnovnye principy vybora racional'noj komponovki kompleksa MNLZ – ShSGP / Je.E. Bejgel'zimer, Ju.V. Konovalov, A.L. Ostapenko i dr. // Stal' . 1991. № 11. s. 38 – 41.
10. Sharfenort U., Hoppman G.-D., Shmic P. Celesoobraznost' ispol'zovanija shirokopolosnyh stanov gorjachej prokatki na sovremennyh zavodah // Chjornye metally. 1996. № 12. S. 30-42.
Published
2022-01-24
How to Cite
Shitov, M. 2022. “INCREASED FLEXIBILITY IN THE TECHNOLOGICAL SYSTEM: CONTINUOUS CASTING MACHINE (CCM) – HOT STRIP MILL (HSM) ”. EurasianUnionScientists, January, 54-57. https://doi.org/10.31618/ESU.2413-9335.2021.1.93.1548.
Issue
EURASIAN UNION OF SCIENTISTS. SERIES: TECHNICAL AND PHYSICAL AND MATHEMATICAL SCIENCES. VOLUME 1 №12 (93) (2021)
Section
Article

CC BY-ND

A work licensed in this way allows the following:

1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.

2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."

2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.