FECOCRNIMOTIW HIGH-ENTROPIC COATINGS AND THEIR PROPERTIES
Abstract
The objects of study were high-entropy coatings of the composition FeCoCrNiMoTiW made by mechanical alloying. It is shown that the hardness of most stainless steels is 1.5-2 times less than high-entropy coatings, and the dry friction coefficients are in the range of 0.08-0.16. Such a difference in the coefficients of friction for high-entropy coatings is due to their nanostructural feature and the manifestation of the dimensional dependence of their properties. Theoretically, we consider the question of the response of the electron subsystem in high-entropy alloys to an external action during friction from the standpoint of nonequilibrium statistical thermodynamics. As a result, it was shown that the coefficient of friction of the coating decreases with the use of a high-entropy alloy and with a decrease in the surface energy of the coating.
References
Yeh J.-W., Chen S.-K., Lin S.-J., Gan J.-Y., Chin Ts.-Sh., Shun T.-Ts., Tsau Ch.-H., Chang Sh.-Y. Nanostructured High-Entropy Alloys with Multiple Principle Elements: Novel Alloy Design Concepts and Outcomes // Advanced Engineering Materials, 2004, Vol. 6, №8. - P. 299-303.
Yeh J.W., Chen Y.L., Lin S.J. High-entropy alloys – a new era of exploitation // Materials Science Forum, 2007, Vol. 560. – P. 1-9.
Wang Y.P., Li B.Sh., Heng Zh.F. Solid Solution or Intermetallics in a High-Entropy Alloy // Advanced Engineering Materials, 2009, Vol. 11, № 8. – P. 641-644.
Firsov S.A., Gorban V.F., Krapivka N.A., Pechkovskij E.P. Uprochnenie i mehanicheskie svojstva lityh vysokoentropijnyh splavov // Kompozity i nanostruktury, 2011. - № 2. - S. 3-20.
Senkov O.N., Wilks G.B., Scott J.M., Miracle D.B. Mechanical Properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys // Intermetallics, 2011. - Vol. 11. - P. 698-706..
Chou H.-P., Chang Y.-Sh., Chen S.-K., Yeh J.-W. Microstructure, thermophysical and electrical properties in AlxCoCrFeNi (0≤x≤2) high-entropy alloys // Materials Science and Engineering B, 2009. - Vol. 163. - P. 184-189.
Gorban V.F., Krapivka N.A., Firstov S.A. Vysokoentropijnye splavy-elektronnaya koncentraciya-fazovyj sostav-parametr reshetkisvojstva // Fizika metallov i metallovedenie. - 2017. - T. 118. - № 10. - S. 1017-1029.
Pogrebnyak A.D., Bagdasaryan A.A., Yakushenko I.V., Beresnev V.M. Struktura i svojstva vysokoentropijnyh splavov i nitridnyh pokrytij na ih osnove // Uspehi himii, 2014. - T. 83(11). - S. 1027-1061.
Miracle D.B., Senkov O.N. A critical review of high entropy alloys and related concepts // Acta Mater., 2017, Vol. 122. - P. 448–511.
Shajsultanov D.G. Struktura i mehanicheskie svojstva vysokoentropijnyh splavov sistemy CoCrFeNiX (H=Mn, V, Mn, V, Al i Cu). – Diss. kand. teh. nauk, 2015. - Belgorod. - 142 s.
Ivchenko M.V. Struktura, fazovye prevrasheniya i svojstva vysokoentropijnyh ekviatomnyh metallicheskih splavov na osnove AlCrFeCoNiCu // Diss. kand. fiz.-mat. nauk. Ekaterinburg, 2015. - 167 s.
Yurchenko N.Yu. Razrabotka i issledovanie vysokoentropijnyh splavov s vysokoj udelnoj prochnostyu na osnove sistemy Al-Cr-Nb-Ti-V-Zr. - Diss. kand. teh. nauk, Belgorod, 2019. - 187 s..
Yurov V.M., Eremin E.N., Guchenko S.A. (2020). Wear resistance and tribological properties of high entropy coatings CrNiTiZrCu // Eurasian Physical Technical Journal, Vol.17, No.1 (33). – P. 13-18.
Yurov V.M., Guchenko S.A., Mahanov K.M. Strukturnye svojstva vysokoentropijnogo pokrytiya TiNiZrCuCr // Sovremennye naukoemkie tehnologii, 2020 №4. – S. 78-83.
Yurov V.M., Guchenko S.A., Mahanov K.M. Atomno-silovaya mikroskopiya vysokoentropijnyh pokrytij // Mezhdunarodnyj zhurnal prikladnyh i fundamentalnyh issledovanij, 2020, №4. – S. 62-67.
Yurov V.M., Guchenko S.A., Tvardovskij A.N. Dve misheni dlya magnetronnogo naneseniya vysokoentropijnyh pokrytij // Tendencii razvitiya nauki i obrazovaniya, 2020, №60 (1). – S. 28-34.
Yurov V.M., Guchenko S.A. Opredelenie treniya raznorodnyh par tribosopryazheniya // Shkola nauki, 2020, № 1(26). – S. 5-8.
Povolockij D.Ya., Gudim Yu.A. Proizvodstvo nerzhaveyushej stali. - Chelyabinsk: Izd-vo YuUrGU, 1998. - 236 s.
Kragelskij I.V., Vinogradova I.E. Koefficienty treniya. - M.: Mashgiz, 1962. – 220 s.
Yurov V.M. Superfecial tension of pure metals // Eurasian Physical Technical journal, 2011, Vol. 8, № 1 (15). - P. 10-14.
Rusanov A.I. (). Fazovye ravnovesiya i poverhnostnye yavleniya. Izdatelstvo "Himiya", Leningradskoe otdelenie, 1967. - 388 s.
CC BY-ND
A work licensed in this way allows the following:
1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.
2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."
2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.
