CALCULATED DETERMINATION OF PRE-HEATING PARAMETERS FOR WELDING POLYETHYLENE PIPES FOR GAS PIPELINES AT LOW AIR TEMPERATURES.
Abstract
According to regulatory documents, welding can be performed at ambient temperatures from minus 15 ° C to plus 45 ° C. When laying gas pipelines at a lower outside temperature, it is necessary to organize their heating to the required temperature. In this case, the temperature of the heated air should not be more than plus 60 ° C. If you start working with a polyethylene (PE) pipe at low temperatures, then the PE pipe will have completely different characteristics. The weld seam may not be reliable.
References
2.M.V. Vasileva, D.A. Ammosov. Matematicheskoe modelirovanie na vychislitelnoj biblioteke FEniCS. 2018.
3.Vabishevich P. N., Vasileva M. V., Kuzakov S. V.Matematicheskoe modelirovanie v estestvoznanii. 2013–2014–2015.
4.P.N. Vabishevich, A.E. Kolesov, P.V. Sivcev.Prikladnoe programmnoe obespechenie dlya chislennogo resheniya zad. 2019.
5. V.B. Andreev. LEKCII PO METODU KONEChNYH ELEMENTOV. 2010.
6.M. V. Vasileva, P. E. Zaharov, P. V. Sivcev, D. A. Spiridonov. ChISLENNOE MODELIROVANIE ZADACh TERMOUPRUGOSTI DLYa KONSTRUKCII S VNUTRENNIM ISTOChNIKOM
CC BY-ND
A work licensed in this way allows the following:
1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.
2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."
2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.
