DEVELOPMENT OF A PROCEDURE FOR JOINT DETERMINATION AND SEPARATION OF COBALT AND MOLYBDENUM COMPOUNDS FROM SOLUTIONS
Abstract
The article is devoted to the scientific problem of joint determination and separation of cobalt and molybdenum compounds in spent catalysts. For the joint extraction of cobalt and molybdenum from the solution in the form of their thiocyanate complexes, a common extractant, acetone, was introduced. A method for the colorimetric determination of these compounds in solutions is proposed. The concentration limits were determined at which the procedure for the joint determination of cobalt and molybdenum is performed. For cobalt - [0.1-2.0] g / l; for molybdenum - above 0.1 g / l. A method is proposed for the isolation of cobalt and molybdenum compounds with a change in the pH of the solution.
References
2 Hacrinova Yu.A., Hacrinov A.I. Metod sovmestnogo opredeleniya kobalta i molibdena Materialy Vserossijskoj konferencii. Kemerovo, 21-23 noyabrya 2012g. / FGBOU VPO «Kuzbasskij gosudarstvennyj tehnicheskij universitet imeni T.F. Gorbacheva»
3 B.N. Nabivanec. Izuchenie rodanistyh kompleksov pyativalentnogo molibdena // Zhurnal neorganicheskoj himii. – M.: 1959. – Vyp.8. – S. 1797-1803.
4 Babko A.K. Fiziko-himicheskij analiz kompleksnyh soedinenij v rastvorah. – Kiev.: Izda-vo AN Ukr.SSR, 1955. – 328 s.
CC BY-ND
A work licensed in this way allows the following:
1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.
2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."
2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.
